# Printable Camera Quad (Foldable)
Printable medium size camera drone. Tested with 1KG payload, dependent on components. To be used with my gimbal, already uploaded. (Soon to be updated). Compartments specifically sized for The Cube and Herelink. Holes for 4in1 ESC. FCU vibration straps should be printed in TPU or something soft. HIGHLY RECOMMEND printing in polycarbonate or something else with good layer adhesion. Swing arm hinges could split with poor layer adhesion. Carbon tow wrap recommended for this part. Many other components included in this upload and many of them not in the final assembly. May get rebuild errors in SW if I missed some parts. Getting 26 minutes on 6s 12Ah. Room for a 16Ah at least.\
\
**Assets**\
CubePilot URL:\
[Printable Camera Quad ](https://discuss.cubepilot.org/t/printable-camera-quad/3508)\
\
3D Printing File URL:\
[Q7 Drone](https://grabcad.com/library/q7-camera-drone-sony-axxxx-series-1)\
\
Youtube URL:\
[Drone Gimbal Vibration Testing](https://www.youtube.com/watch?v=E0OPrHs6smE)
\
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://docs.cubepilot.org/user-guides/3d-printing/printable-camera-quad-foldable.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.