# HereLink Blue FAQs

## Can the language on the controller be switched?

The system language can be switched in the slide down menu.

## Why aren't the LEDs lit, even though the rover unit are correctly connected?

Check the power input. It should be 5V - 12.6V max (3s Lipo supported) and the battery should be charged.

## Why can't I connect to 2.4GHz WIFI?

Currently, the Datalink only enables 5.8GHz WIFI for internet connection. Therefore, to load maps, you will need to connect to a 5.8GHz WIFI network.

## Does the HereLink Blue have data encryption?

The HereLink Blue encryption over the air uses aes-128-ctr


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.cubepilot.org/user-guides/cubepilot-ecosystem/cubepilot-partners/union-robotics/herelink-blue/herelink-blue-faqs.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.