CubePilot
Where to buySupportArdupilotProducts
  • CubePilot
  • Licences
  • US Defence
  • Service Bulletins and Critical Notices
    • Safety/Service Bulletins
      • SB_0000001 Critical service bulletin for Beta Cube 2.1 (2016)
      • SB_0000002 Critical service bulletin for Cubes Purchased between JAN 2019 to JUL 2019. DO NOT FLY
      • SB_0000003 Flight with arming checks set anything other than 1 prohibited
      • SB_0000004 Limited power capacity of the RCIN power rail on Pixhawk Autopilots
      • SB_0000005 I2C Storm can cause inflight reboots, Chibios ONLY, not Nuttx (all cube and Pixhawk hardw
      • SB_0000006 time to Go Orange
    • Critical Notices
      • Powering Telemetry radios externally
  • Herelink
    • Herelink Overview
    • Herelink User Guides
      • Assembly and Connection
      • How To Update Firmware
      • Pairing, RC Calibration & Setup
      • Configure Modes & Mavlink Buttons
      • Configure Sbus Buttons & Wheel
      • Wireless Communication
      • Video and Data Sharing
      • Connecting to Mission Planner
      • Herelink 1.0 AirUnit to AirUnit instruction
      • System setting
      • Installing a custom app
      • OEM Image Setup
      • Generate a bug report
    • Herelink Accessories
    • Herelink QuickStart Guide
    • Herelink FAQ
  • HERE 2
    • Updating Here 2 Firmware
    • Here 2 CAN Mode Instruction
    • Here 2 Firmware Update Troubleshooting
  • Here 3
    • Here 3 Manual
  • Here+
    • Here+V2 User Manual
  • HERE 4
    • Here 4 Manual
    • Here 4 Base
  • HEREPRO
    • HerePro Manual
  • Autopilot
    • Cube Red
      • Specifications
      • Operating Conditions and Performance
      • Ports Standard and Definition
      • System Architecture
      • Carrier Board Information
    • The Cube Module Overview
    • The Cube User Manual V1.0
    • The Cube - Firmware Installation & Connection Troubleshooting
      • Installing Mission Planner
      • Installing Ardupilot
      • Installing Secure Firmware
    • Conducting the First Flight
      • Tips for New Pilots
    • The Cube FAQ
  • Carrier Boards
    • Cube Red Standard Carrier Board Pinout
    • Kore Carrier Board
    • ADS-B IN Carrier Board
    • Mini Carrier Board
    • Airbot Systems Mini Carrier Board
      • Airbot Systems Mini Carrier Board Set User Guide
    • EDU450 Carrier Board
    • Standard Carrier Board Footprint & Dimensions
    • Carrier Boards FAQ
  • Cube ID
    • Cube ID
  • CubeNode
    • Specifications
    • Functional Overview
    • Pin Descriptions
    • Footprint
    • CubeNode ETH
      • Specifications
      • Setting Up the Physical Connection between the Cube, CubeNode, and laptop/PC
    • Soldering a CubeNode onto a PCB
  • Switch
    • CubeLAN 8 Port Switch
  • FLOW SENSOR
    • Here Flow
  • ProfiLED
    • ProfiLED
  • Product Certificate
    • NCC Certificate
    • CE Certificate
    • UKCA Certificate
    • RoHS Certificate
    • FCC Certificate
    • IC Certificate
    • RCM Certificate
    • Material Safety Data Sheet - MSDS
    • EN 62368 CE LVD VOC Certificate
    • IEC 62368 CB Scheme Safety test Certificate
  • SOLO
    • Open Solo Installation
    • Open Solo
  • CubePilot Ecosystem
    • CubePilot Ecosystem Autopilot Wiring Diagram (Multilingual)
    • OEM Carrier Board
    • CubePilot USA
    • CubePilot Ecosystem Edu450 Reference Design (Multilingual)
    • CubePilot Ecosystem MissionGO
    • CubePilot Ecosystem Doosan Hydrogen Zero Emission Vehicle
    • CubePilot Ecosystem Ardubee multipurpose platform
    • Silent Arrow
    • CubePilot Ecosystem Herelink
    • Acecore NOA, Cubepilot Ecosystem, and George Herelink, the right combination
    • CubePilot Ecosystem Inspired Flight IF1200A
    • CubePilot Ecosystem Here4
    • 2023 CubePilot Ecosystem Autopilot Wiring Diagram
    • CubePilot Ecosystem Cube ID
    • CubePilot Ecosystem Mission Planner
    • CubePilot Ecosystem BZB UAS ekoSKY
    • CubePilot Ecosystem 10th Anniversary of The Cube
    • CubePilot Ecosystem HerePro V2
    • CubePilot Ecosystem Mistral-Qualcomm MRD5165
    • CubePilot Ecosystem Precision Landing Air Test Operation (PLATO)
    • CubePilot Ecosystem Hionos
    • CubePilot Partners
      • SpektreWorks
      • RFDesign Pty Ltd
      • Vamatis
      • Airbot Systems
      • Bask Aerospace
      • HiTEC
      • uAvionix
      • LightWare
      • Gremsy
      • IR-Lock
      • Tattu
      • Mauch
      • T-MOTOR
      • APD
      • JAR Aerospace
      • BZB UAS
      • Kraus Hamdani Aerospace
      • Union Robotics
        • Meadowhawk 2
          • Meadowhawk 2 User Guide
            • TABLE OF CONTENTS
              • 1. GENERAL
              • 2. OPERATING LIMITATIONS
              • 3. EMERGENCY PROCEDURE
              • 4. NORMAL OPERATING PROCEDURES
              • 5. PERFORMANCE
              • 6. WEIGHT AND BALANCE EQUIPMENT LIST
              • 7. DESCRIPTION OF THE sUAS AND SYSTEMS
              • 8. HANDLING, CARE, AND MAINTENANCE
              • 9. SUPPLEMENTS
              • DISCLAIMER AND WARNING
              • LIMITATION OF LIABILITY
        • HereLink Blue
          • HereLink Blue User Guide
            • Air Unit
              • Air Unit Specifications
              • Air Unit LEDs
              • Air Unit Interface & Installation
            • Ground Station
              • Ground Station Specifications
              • Ground Station Buttons & LED
              • Ground Station Charging
          • UR/Solex TX App
          • Pairing & Calibration
          • Configure Buttons
          • Share Video Stream
          • Connecting to Mission Planner
          • Installing a Custom App
            • Installing QGC
          • Important Notes & Warnings
          • Update Firmware
          • Bug Report
          • HereLink Blue FAQs
      • Yates Electrospace Corporation
      • CubePilot Frames
        • Multirotor Frames
          • EDU-450
          • EDU-650
          • TD-900
          • TD-1100
  • Remote ID
    • France
  • 3D Printing
    • CubePilot product 3D model
    • Printable Camera Quad (Foldable)
    • Here 3 Istand
    • HerePro Istand
    • Kore Multi-Rotor Carrier Board Case
    • CubePilot Multirotor Frame
  • Product Media
    • CubePilot Logos
    • Product Media Cloud Drive
  • OEM Carrier Board
Powered by GitBook
On this page
  • About Tattu
  • Tattu series
  • Commercial-Drone Batteries
  • FPV Batteries
  • Others
  • About Grepow
  • Media

Was this helpful?

  1. CubePilot Ecosystem
  2. CubePilot Partners

Tattu

Last updated 3 years ago

Was this helpful?

About Tattu

Founded by Grepow in 2015, Tattu has become renown as the tried-and-true battery brand for professional drones, eVTOLs, FPVs, and remote control hobbies. It has continued to deliver reliable, local customer support for years with its offices located in the United States, Germany, and mainland China and Taiwan.

With Grepow’s more than 20 years of experience in battery development and production, Tattu has unfailingly yielded high-quality battery packs that have pushed the UAV industry to new heights. Its work as an industry-leading brand has gained public recognition as reflected with its acceptance of the Innovation Product Award at the 2021 Drone World Conference.

Tattu series

Tattu batteries’ capacity, C-rate, weight, and other specs have been designed according to industry standards and demands of its many pilots. With its dependable yet powerful Smart and High Voltage series, Tattu batteries carry quite the punch. For smaller packs, the Funfly and R-Line series have and continue to be a trustworthy choice.

Commercial-Drone Batteries

Tattu Smart Batteries are equipped with a BMS and anti-spark capabilities, combined with a high-performance, low-power MCU to give users a better understanding of their battery status. The compact and waterproof housing optimises the reliability of the system in harsh environments.

There is a plethora of other options: high-voltage and low-temperature batteries can be used in a wider range of scenarios; the NMC 811 battery makes a breakthrough with an energy density of 275wh/Kg and cycle life of 1000 cycles, which extends operating times.

Tattu products are widely used in film aerial photography, agricultural spraying, surveying and mapping, forest fire prevention, flood rescue, cargo transportation and many other fields.

FPV Batteries

With its high output current and high C-rate, Tattu FPV batteries are often found in major competitions, such as the Multi GP and EMHC. Their performance pushes pilots to achieve the best flights. With superb battery technology, light weight, and high reliability, these battery packs are versatile and used in FPV drones, races, and many other applications.

Others

Tattu isn’t the only brand that Grepow offers. Under Gens Ace, there are chargers and batteries for receivers, transmitters, and other remote control hobbies.

About Grepow

Founded in 1998, Shenzhen Grepow Battery Co., Ltd. has its own 4 factories and more than 3000 global and local employees. Grepow specializes in the research and production of NIMH, LiPo, LiFePO4 batteries and the development of power management systems. From industrial equipment to smart rings, Grepow can provide power to support them all.

Media

For more information on Tattu, peruse the below websites and social media:

Email: info@grepow.com

If you can’t find what you need under Tattu and Gens Ace, then look no further: Grepow offers custom battery solutions regardless of whether you’re inquiring into OEMs or ODMs. Contact Grepow at for your specific needs and applications.

USA Website:

EU Website:

Facebook:

Instagram:

Youtube:

info@grepow.com
https://www.genstattu.com/
https://www.gensace.de/
https://www.facebook.com/Tattulipos
https://www.instagram.com/tattulipos/​
https://www.youtube.com/channel/UCfWP-RIqbjGPx-V_5jkNy5Q